ACP Technologies|sublimation| dye, printer, blanks| Unisub Vapor Premiere Powered by JRank
Dedicated to all your Digital Decorating needs
Contact Us   |   View Cart
 

Heat Pressing Info

 

SilverTree

 

Creating the Transfer
1) Open the CorelDRAW file Jewelry Template.cdt – DO NOT IMPORT IT!
2) Delete the charm outlines you won’t use or move them off the page
3) Import the photo (or other image) that you want on the charm
4) Size the image accordingly, then use the PowerClip feature in CorelDRAW to place it inside the black outline of the charm - the red outline is the exact size of the charm for visual reference only, and will not print
5) If you use the PowerClip feature, is advisable to convert the PowerClipped image into a bitmap
 
 
 

 
 
Pressing SilverTree
1) Preheat press to 400°F and set to medium pressure
2) Secure charm to transfer with heat tape centering charm face-down inside the black outline – do not fold the paper as the black outline will print on the back of the charm
3) Place a clean sheet of plain paper on the heat press table (optional)
4) Place charm face-up in heat press
5) Place a clean sheet of plain paper on top (optional)
6) Heat charm for 2 minutes
7) Let charm cool completely – Do not remove the transfer
8) Heat charm face-up for an additional 2 minutes
 
*** ACP does not recommend using SubliJet R and SubliJet XG8 ink to imprint SilverTree jewelry. ***
 
 

 
The information contained herein is included for illustrative purposes only and, to the best of our knowledge, is accurate and reliable.  ACP Technologies cannot, however, under any circumstances make any guarantee of results or assume any obligation or liability in connection with the use of this information.  As ACP has no control over the use to which others may put its products, it is recommended that the products be tested to determine if suitable for a specific application and/or information is valid in a particular circumstance.  Responsibility remains with owner for the design, application and proper installation of each product.  Specifier and user shall determine suitability of products for a specific application and assume all responsibility in connection therewith.


  Customer Service: 1-800-741-2551
 
 
425 Cross St. - Ste 213, Punta Gorda, FL  33950

 
Mon–Fri 9am-5pm EST
 
©2017 ACP Technologies. All rights reserved.